fit_cir30.conf

#File fit_cir30.conf
#DM fitting directions.
 
#Circular 30" diameter FoV. 1+8 points at 2 rings with simpson weighting
fit.thetax = [0 0.5 0.3536   0 -0.3536 -0.5 -0.3536 -0    0.3536]
fit.thetay = [0   0 0.3536 0.5  0.3536    0 -0.3536 -0.5 -0.3536]
fit.wt     = [1/2 1/12 1/24 1/12 1/24 1/12 1/24 1/12 1/24]
fit.fov    = 30