MAOS
Multithreaded Adaptive Optics Simulator
Loading...
Searching...
No Matches
mkh.h File Reference

Functions

dsp * mkht_cubic (propdata_t *propdata, real iac)
dsp * mkh_cubic (propdata_t *propdata, real iac)
dsp * mkht (propdata_t *propdata)
dsp * mkh (propdata_t *propdata)
dsp * mkhbin1d (const dmat *xin, const dmat *xout)

Detailed Description

Contains functions that create ray tracing operator

Function Documentation

◆ mkht_cubic()

dsp * mkht_cubic ( propdata_t * propdata,
real cubic_iac )

Create transpose of ray tracing operator from locin to locout using cubic influence function that can reproduce piston/tip/tilt. Fall back to mkht if iac==0

◆ mkh_cubic()

dsp * mkh_cubic ( propdata_t * propdata,
real cubic_iac )

Transposes the result from mkht_cubic.

◆ mkht()

dsp * mkht ( propdata_t * propdata)

Create transpose of mkh() raytracing matrix. The ray (opd) starts from locin and land in locout.

Parameters
[in]propdataSee accphi.h

◆ mkh()

dsp * mkh ( propdata_t * propdata)

Create ray tracing operator from coordinate locin to locout. Locin is required to be evenly spaced.

If vector Pin is defined on locin, Pout is defined on locout, H=mkh(locin, locout, ...), Pout=H*Pin does the bilinear interpolation.

If locin->iac is non zero, will call mkh_cubic to produce a cubical interpolation.

A cubic influence function that can reproduce piston/tip/tilt is coined by Ellerbroek to model the piezostack DM actuator. The influence has the form

\[h(x;x_{i};\delta)=h_{0}((x-x_{i})/\delta) \]

where \(\delta\) is the same as the grid spacing, and \(h_{0}\) is the influence function defined in the normalized coordinates

\begin{eqnarray*}h_{0}(x)=\frac{1}{1+2c}\begin{cases} 1+(4c-\frac{5}{2})|x|^{2}+(\frac{3}{2}-3c)|x|^{3} & |x|\leq1\\ (2c-\frac{1}{2})(2-|x|)^{2}+(\frac{1}{2}-c)(2-|x|)^{3} & 1<|x|\leq2\\ 0 & |x|>2\end{cases}\end{eqnarray*}

where c is the nearest neighbor coupling frequency. The leading coefficient is to normalize the influence function so that it sums to 1.

Parameters
[in]propdataSee accphi.h

◆ mkhbin1d()

dsp * mkhbin1d ( const dmat * xin,
const dmat * xout )

Create a matrix to bin from coordinate xin to xout using bilinear interpolation. xin and xout should be 1-d arrays of coordinates. We require the coordinates to order incrementally monotonically, but do not require them to be evenly spaced.