MAOS
Multithreaded Adaptive Optics Simulator
Loading...
Searching...
No Matches
examples/strata.conf
#Define Strata with KASM (GLAO or LTAO)
#base LTAO configuration
include = ltao.conf
#Telescope aperture
include = keck.conf
#KASM Parameters
dm.dx = [0.1624] #this is the average spacing of actuators within the clear aperture. Updated 2026-07-31
dm.ht = [-128.7] #conjugation Updated 2026-07-31 based on https://www2.keck.hawaii.edu/optics/teldocs/prescriptions.html
#Atmospheric profile
include = atm_mk50pGL_50pFA.conf #Mauna Kea 13N 50%. Updated 2026-07-31
atm.size = [128 128] #to covert the largest FoV.
sim.wspsd = PSD_Keck_ws20mas_vib26mas_rad2.fits
#Wavefront sensor information
include = wfs_lgs_ttf.conf #LGS + TTF WFS
include = powfs_shtwfs.conf
powfs.nwfs = [4 1 1] #4 LGS, 1 TTF WFS
wfs.thetax = [-0.355 -0.355 0.355 0.355 0.5 0] #WFS location on sky. To be scaled by powfs.astscale
wfs.thetay = [-0.355 0.355 -0.355 0.355 0 0]
powfs.astscale = [15.2 0 0]
powfs0_llt.ox= [-1 -1 1 1]*6.5 #LGS LLT position at M1 coordinate
powfs0_llt.oy= [-1 1 -1 1]*1
powfs0_llt.focus=140 #simulate realistic llt focus
powfs.dsa = [0 -2 -30] #subaperture size. 0 matches ground DM.
powfs.dtrat = [1 1 1000]
powfs.nwvl = [1 1 1 ] #number of wavelength for each powfs
powfs.wvlwts = [1 1 1] #wavelength weights.
powfs.wvl = [0.589 0.7 0.7] #wavelength
powfs.pixtheta=[1 0.5 0.5] #pixel scale in arc seconds
powfs.pixpsa = [-8 6 6] #number of pixels per subaperture dimension. negative means fov in arcsec.
powfs.rne = [1.8 0.5 0.5] #read out noise
powfs.mag = [7.5 8 8] #magnitude at zenith. use 7.5 for 1.8e rne
powfs.atmthruput=[0.896 0.896 0.896] #these numbers are current kapa number
powfs.telthruput=[0.36*0.9 0.32 0.03] #these numbers are current kapa number
evl.wvl = [0.31 0.5 0.7 0.8 0.9 1.0 1.25 1.65 2.15]*1e-6 #For IR add 1.25 1.65 2.15
evl.psfsize = [960, 512, 360, 300, 256, 240, 180, 128, 90] #proportional to wvl^(-6/5). make sure it is large enough for worse seeing.
evl.psfmean = 1 #save time averaged PSF
evl.psfol = 1 #save open loop PSF
evl.psf = [1] #enable PSF for direction
evl.psfisim = 20 #frame to start computing PSF
#Instrument/port dependent ones are specified in strata_[port].conf
#Asterism scale
#powfs.astscale
#Evaluation and fitting FoV information.
#include = fit_cir60.conf
#fit.wt = [0.5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1]
#fit.fov = 180 #DM Fitting Fov diameter in arcseconds
#Performance Evaluation
#include = evl_x.conf #Along a radius
#evl.fov = 180 #Evaluation oV diameter in arcseconds
#Implementation error based on kapa estimation
ncpa.surf=['r0=0.5; L0=5; slope=-2; seed=1; SURFEVL=[1]; SURFWFS=[0]'] #Simulate HO implementation error of 127.4 nm
ncpa.calib=0
sim.seeds = [1 10 20 30]
sim.end = 6020 #10 seconds
sim.dt = 1/600