fit_cir30.conf

#File fit_cir30.conf
#DM fitting directions.

#Circular 30" diameter FoV. 9 points.
fit.thetax=[0  0.5  0.3536    0  -0.3536  -0.5 -0.3536   -0   0.3536]
fit.thetay=[0  0   0.3536   0.5   0.3536    0 -0.3536  -0.5  -0.3536]
fit.wt =   [1/2 1/12 1/24 1/12 1/24 1/12 1/24 1/12 1/24]
fit.fov= 30